返回首页
 
用户名:
密  码:
    

石墨 锡槽用石墨制品 泵、机封、轴套 碳石墨和浸渍金属石墨
四氟石墨 热压石墨 高纯石墨 柔性石墨 金属缠绕垫片 异形产品  刮片石墨条

石 墨 简 介

      石墨是用焦碳粉和石墨粉或加碳黑做基料,用沥青为粘结剂,经模压成型在高温下烧制而成的。一般将烧结石分为二种。一种为碳素石墨,以称碳石墨,其特点是质硬、脆;另一种为石墨化石墨,以称电化石墨,其特点是质软、强度低,自润滑性能好。

      石墨具有优良的耐腐蚀性能。其化学稳定性能很高,在空气中400℃以下稳定,除强氧化性介质如王水、铬酸、浓硫酸及卤素外,可耐其它酸、碱、盐类及一切有机化合物的腐蚀。石墨的耐腐蚀程度一般随基料的种类和浸渍剂的不同而异。

      石墨是机械密封摩擦付材料中用量最大,使用范围最广的一种材料。它具有优良的耐腐蚀性能,除了强氧化性介质外,可以耐各种浓度的酸、碱、盐类及一切有机化合物的腐蚀。同特别好的自润滑性和低的摩擦系数,与钢对磨时,摩擦系数为0.04-0.05,经浸渍处理的碳石墨在流体动力润滑条件下,其摩擦系数在0.08-0.1范围内。石墨具有很高的导热系数(100~110千卡/米·时·度),较低的线膨胀系数(2~3×10-6℃)以及良好的耐温急变性能和加工性能,可以进行各种机械加工。

      Graphite is the widest and most quantity materials used in the machine seal parts. It has a good erode-resistant ability. It can stand against cauterization from acid, alkali, salt and all organic compound except strong oxidation material.

      Because of it's special ideal lubricative ability, the rub coefficient is between with 0.04 and 0.05 when it is rubbed with steel. With dipping treatment, under the situation of hydrokinetics, the rub coefficient is between with 0.08 and 0.10.

      Graphite has a high heat-transmiting coeficient(100~110kilo-calorie/metre hour degree), and a lower line expanding coefficient(2~3×10-6℃), favorable anti-temperature deformationand machining ability. It can be processed by several kings of mechanical means.

型号
材料类型
抗折强度
公斤/厘米2
抗压强度
公斤/厘米2
肖氏强度
HS
假比重
克/厘米2
气孔率
%
热膨胀系数
×10-6
使用温度

M121
碳石墨
260
750
65
1.56
17
4.0
350
M106H
浸环氧
树脂
300
1100
60
1.60
5
11.0
200
M120H
420
900
60
1.68
5
11.0
200
M204H
300
700
40
1.90
5
8.0
200
M650H
600
980
55
2.2
3
7.0
300
M106K
碳石墨
浸渍呋喃树脂
570
1200
80
1.69
5
11.0
220
M205K
浸呋喃树脂
500
1800
75
2.15
5
10.0
200
M232L
碳石墨浸铝合金
1000
2000
40
2.15
4
6.0
400
M106Y
碳石墨浸渍
巴氏合金
600
2000
60
2.36
5
6.0
180
M232Y
400
1500
50
2.06
5
6.0
180

Copyright(c) 南通市振新机械密封件有限公司 版权所有
网站建设与网络推广:海门市中信商务有限公司
海门网站优化-百度推广-网络建设-淘宝装修-天猫装修-
域名注册服务商:海门市中信商务有限公司